Hydraulic large diameter impact crusher

　　Hydraulic large diameter impact crusher adopts unique designs such as heavy rotor, large-capacity crushing chamber, thick impact plate, high-wear-resistant alloy blow bar, hydraulic opening device, etc. It has the advantages of greater crushing capacity and crushing ratio, low operating cost and convenient maintenance.

　Application-Construction waste disposal solution　

　　construction waste

　　Defined as residual soils, excavated materials, demolition debris, slurry, and other waste

　　substances generated during construction, demolition, or renovation activities by construction units or individuals on buildings, structures, pipelines, and related infrastructure.

　　Solution description:

　　Our system utilizes hydraulic jaw crushers, large-diameter impact crushers, high frequency composite screens, and lightweight material sorting equipment to execute a streamlined conversion process.

Performance Requirements for Impact Crushers
• Impact Crusher (DMI1313): Impact crushing; Sealing treatment for feed and discharge ports of the anti-impact crusher to prevent dust leakage; Bearing seats are cast integrally with cast steel; Rotors adopt segmented welding process; Full hydraulic adjustment is used, including hydraulic station, hydraulic iron remover, hydraulic adjustment of discharge port, and hydraulic cover opening.
• Impact Crusher (DMI1013): No additional special performance requirements specified (main requirements are reflected in technical parameters).

Equipment Name	Parameter Item	Parameter Content
Impact Crusher DMI1313	Maximum Feed Size	≤500mm (to meet the feeding of heavy materials in decoration waste)
	Processing Capacity	≥150t/h (calculated based on medium-hardness materials with a density of 1600KG/cubic meter)
	Rotor Dimension	≥Φ1300×1300mm
	Number of Crushing Chambers	2
	Impact Liner & Hammer Material	Impact liner wear resistance: Not less than ZGMn13Cr2; Hammer material: KmTBCr26
	Installed Power	≥220kw, soft start mode
	Drive Motor Brand / Protection Class	Leibo; IP55
	Lubrication Method	Grease lubrication
Impact Crusher DMI1013	Maximum Feed Size	≤400mm (to meet the feeding of heavy materials in decoration waste)
	Processing Capacity	50-80t/h
	Material Return Rate	≤30%
	Installed Power	75kw, soft start mode
	Drive Motor Brand / Protection Class	Leibo or domestic equivalent grade; IP55
	Impact Liner & Hammer Material	Impact liner wear resistance: Not less than ZGMn13Cr2; Hammer material: KmTBCr26
	Bearing	TMB
	Frame Opening Method	Hydraulic opening method